Ospf Neighbor Tab Parameters - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Procedures
............................................................................................................................................................................................................................................................
Table 5-4 OSPF NEIGHBOR tab Parameters
Parameter
AID
ROUTER
REMOTE PORT
STATE
DEADTIME
RTXQ
EVENTS
............................................................................................................................................................................................................................................................
5 - 26
Description
It represents the Access Identifier for the OSPF neighbor
entity. Possible value are:
ALL (ALL AID)
•
LAN-1 (Customer LAN)
•
OC12-{1-7}-{1-9}-{2-9,12-19,21-36}-{1-8} (OC-12)
•
OC3-{1-7}-{1-9}-{2-9,12-19,21-36}-{1-8} (OC-3)
•
OC48-{1-7}-{1-9}-{2-9,12-19,21-36}-{1-4, 5, 7} (OC-
•
48 on a 2G5SO or 10xANY)
OC192-{1-7}-{1-9}-{2-9,12-19,21-36}-1 (OC192)
•
IPIP-{1-300000} (Virtual Link using IPover IP
•
encapsulation)
GRE-{1-300000} (Virtual Link using GRE
•
encapsulation)
It represents the identifier (represented as a type IP Address)
of the neighboring router in the Autonomous System.
Possible value are: {1-99, 101-126, 128-223}-{0-255}-{0-
255}-{1-254}
It represents the IP address this neighbor is using in its IP
Source Address. Note that, on addressless links, this will not
be 0-0-0-0, but the address of another of the neighbor's
interfaces. Possible value are: {1-99, 101-126, 128-223}-{0-
255}-{0-255}-{1-254}
It represents the state of the relationship with the neighbor.
The first four states (from DOWN to TWO_WAY) are related
to router adjacency status with exchange of OSPF "Hello"
packets. The last four (from EXCHANGE_START to FULL)
are involved for route discovery , exchanging OSPF LSA
packets.Possible value are: DOWN, ATTEMPT, INIT, TWO-
WAY, EXCHANGE-START, EXCHANGE, LOADING,
FULL
It represents the time remaining in seconds within which we
need to receive an hello packet from the neighbor or we
declare the adjacency down. If fast hellos area in use, this
value is always set to 1. If the operational status is down or
ospfPmNbrState is DOWN, then the value is set to zero and
the field is not valid. Possible value is <INTEGER>.
It represents the current length of the retransmission queue.
Possible value is <INTEGER>.
It represents the number of times this OSPF interface has
changed its state, or an error has occurred. Possible value is
<INTEGER>.
Control Plane - Configure OSPF and DDRP
Issue 3 July 2009
8DG08136EAAA