Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 229

Tree area
............................................................................................................................................................................................................................................................
PHYSICAL functional tab (for Ethernet Transparent System)
The PHYSICAL functional tab is made up of five panels:
State panel
•
It allows to change the settings of the resource by means of the following parameters:
•
•
•
•
•
The panel has the Save hyperlink which applies the previous selections and restart with
new selection.
Loopback panel
•
It shows the settings of the loopback resource:
•
•
The allowable values are: enabled (the enabling is available only in case of P2P = Point-
to-Point Connection) or disabled.
The panel has the following hyperlinks:
– Create line loopback
– Create internal loopback
Ethernet port panel
•
It allows to change the settings of the resource by means of the following parameters:
•
•
•
•
•
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Admin state: The combo-box allows to set the administrative state. The allowable
choices are: up = active state or down = not active state.
Last change: The text field shows the date and time when the resource had been
managed last time.
Operational state: The text field shows the actual state of the resource.
MAU Operational state: The text field shows the actual state of the Medium
Access Unit (MAU).
Alarm Severity Profile: The text field shows the ASAP label that is in use for the
resource.
Line loopback: It shows the from DTE back to DTE loopback status. The
allowable values are enabled or disabled.
Internal loopback: It shows the from Remote Port-Rx back to Remote Port-Tx
loopback status.
Connector present: The text field indicates if the interface has a physical
connector. The allowable values are: true or false.
Type: The text field indicates the type of port (fixed to "ethernetCsmacd"). The
values fixed: ethernetCsmacd.
Speed: The text field indicates the actual configured rate. The allowable values
are: 1000000 (1Gb/s) or 10000000 (10 Gb/s).
Alias: The entry field indicates the friendly name for the interface, settable by the
user.
Encapsulation mode: The text field indicates the method of MAC packets
encapsulation inside the underlying physical layer. The allowable values are:
ethernetV2 (default) or IEEE8023.
Access a resource
4 - 5 1