Data - Search - Alcatel-Lucent 1850 TSS-320 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-22 Data - Search
The Search tab displays the Range and the Search criteria panels. The Range panel
displays the following parameters:
From: and To - Allows to limit the search into the indicated range of resource's
•
indexes. After the selection procedure, the selected value is reported.
The Search criteria panel displays the following parameters:
Port Type - The combo-box allows to select the type of Ethernet port. The values are:
•
– LOCAL - To set as search parameter for the local Ethernet Port.
– REMOTE - To set as search parameter for the remote Ethernet Port.
Status - The values are:
•
– UP - To search the port in-service.
– DOWN - To search the port out-of-service.
Client Type - The Client Type value displays the following values:
•
– ETS (Ethernet Transparent Service) - a provider service that emulates the
– ETB (Ethernet Bridge) - Representing the Ethernet Bridge Port that has been
– LINKAGG - For Link Aggregation System. The DATA system supports the Link
............................................................................................................................................................................................................................................................
3 - 32
functionality of a traditional Local Area Network.
configured to work in "auto learning" modality; i.e. it is a resource of the bridge
functionality.
Aggregation at the Ethernet side, as specified in IEEE Std. 802.3ad-2000; it is a
technique to aggregate many data streams into a single logical link. The resulting
aggregate link will be treated by the system (with regard to instances about
network protections, etc.) as a single link. It permits to overcome the bandwidth
limitation of the single ethernet interfaces, or to protect the traffic. Permitted port
rates to be aggregated are 1 Gbps and 10 Gbps.
Data menu
8DG08136EAAA
Issue 3 July 2009