Menu bar
............................................................................................................................................................................................................................................................
Tools
Help
Following are the Menu and Sub-Menu options available in the
menu bar" (p.
Control Plane - Allows the operator to manage the Control Plane Transport ports
•
within the equipment.
– CP TDM - has the following options:
Equipment - Allows to manage the equipment configuration:
•
– Create Shelf - Allows to set a new shelf in the rack.
– Refresh Tree - Allows to update the page area tree.
Connection - This menu allows to manage (provisioning, service type etc.) the
•
client/line traffic.
– TDM - Allows to set the SONET service.
– Data - Allows to set the Ethernet Point-to-Point cross-connection service.
Data - This menu allows the operator to set the service for Data traffic:
•
– Traffic descriptor - To set the operation mode.
– VLAN Profile - To set the Virtual LAN profile.
............................................................................................................................................................................................................................................................
8DG08136EAAA
Issue 3 July 2009
Logout
->
TL1 Console
NE TL1 Param
About
Help On Line
NE TL1 Syntax
3-8).
•
Transmission - Allows to manage the SONET connections and TDM tunnel
timeslots.
•
Routing - Allows to manage a static IP route from the IP routing table.
•
Signaling - Allows to manage the parameter for CP tunnel bandwidth profile
for Packet Switch Capability (PSC).
•
Create XC - Allows to manage the cross-connections.
– P2P - Allows to set Point-to-Point cross-connections.
– PB - Allows to set Provider Bridge cross-connections.
•
Search/Delete XC - Allows to perform the searching and deleting procedures.
Command
Privileges
Audit
Log Settings
Table 3-1, "Application
System access
3 - 1 1