Alcatel-Lucent 1850 TSS-320 User Provisioning Manual page 192

Tree area
............................................................................................................................................................................................................................................................
– User label - Allows the user to digit a name to describe this resource. The format
– Service Type - Refers the upper layer service type: ethernet.
– Flow type - The options: unicastNoAutolearning (for unicast cross-connection
– Traffic descriptor - Allows to select the traffic type. Possible values are: beffort
– Layer 2 control frames (0x) - Allows to enable or disable the Protocol Frames
– Actual Layer 2 control frames (0x) - Refers about the enabling or disabling the
– Policing mode - Refers about the policing on the incoming ETS traffic. Possible
– Color profile - Refers about the name of the association between the incoming S-
– VLAN pop - If enabled it pops out the "Stacked-VLAN" shim fields of the
The panel contains the following hyperlinks:
Cancel - To cancel the settings and return to the previous page.
Save - To apply the previous settings and return to the previous page.
Deactivate - To change the State field only and return to the previous page.
Add a classifier - To open the relevant page, it allows to set a further classifier.
b. Classifier Criteria panel
– Classifier index: This is an incremental index assigned by the system to the
– State: This is the notification about the actual status of the resource; active (the
– Configuration type: It refers the transmission parameters of the 1850TSS Data
............................................................................................................................................................................................................................................................
4 - 14
is <1-30 VALID NAME CHARACTERS>.
link) or multicast OptionA (for multicast cross-connection link - not available in
current release).
(Best Effort Service) or guar (Guaranteed Service) or reg (Regulated Service).
that can accede the port. Clicking on the Bitmask details button it is possible to
display and set the bitmask.
Protocol Frames that accedes the port.
options: disabled (the policing is not performed) or color-blind (the policing is
based on the associated TD, without taking into account the "prioritization") or
color-aware (the policing is based on the associated TD and on the priority colors
of the associated "Color profile").
VLAN priorities and the forwarded frames coloring (for scheduling purposes,
inside the bridge). If a Color Profile is associated, the priority field of the relevant
associated Classifier is different from untagged or don't care; further the TD type
is regulated.
ethernet frame. SVLAN tags transport information used by an external provider
network. The options are: enabled or disabled. If this is enabled, the "priority"
field of the relevant Classifier must be different from untagged or don't care.
resource.
resource is in-service); not active (the resource is out-of-service).
Node. Possible options: manual (in this case the STP function is not active) or STP
(for simple Spanning Tree Protocol functions) or RSTP (for Rapid Spanning Tree
LAG configuration
8DG08136EAAA
Issue 3 July 2009