Edge-Core ECS4610-24F Management Manual page 97

Table 4: Switch Main Menu (Continued)
Menu
Routing Protocol
RIP
General
Configure
Clear Route
Network
Add
Show
Passive Interface
Add
Show
Neighbor Address
Add
Show
Redistribute
Add
Show
Distance
Add
Show
Interface
Add
Show
Modify
Statistics
Show Interface Information
Show Peer Information
Reset Statistics
Description
Routing Information Protocol
Enables or disables RIP, sets the global RIP attributes and timer
values
Clears the specified route type or network interface from the
routing table
Sets the network interfaces that will use RIP
Shows the network interfaces that will use RIP
Stops RIP broadcast and multicast messages from being sent on
specified network interfaces
Shows the configured passive interfaces
Configures the router to directly exchange routing
information with a static neighbor
Shows adjacent hosts or interfaces configured as a neighboring
router
Imports external routing information from other routing domains
(that is, protocols) into the autonomous system
Shows the external routing information to be imported from other
routing domains
Defines an administrative distance for external routes learned from
other routing protocols
Shows the administrative distances assigned to external routes
learned from other routing protocols
Configures RIP parameters for each interface, including send and
receive versions, authentication, and method of loopback
prevention
Shows the RIP parameters set for each interface
Modifies RIP parameters for an interface
Shows RIP settings, and statistics on RIP protocol messages
Displays information on neighboring RIP routers
Clears statistics for RIP protocol messages
– 97 –
| Using the Web Interface
C 3
HAPTER
Navigating the Web Browser Interface
Page
484
485
485
488
489
489
489
491
491
491
492
492
492
493
493
493
495
495
495
496
496
496
496
500
501
502