Basic; Tasks; Displaying System Information - Edge-Core ECS4610-24F Management Manual

4
D S
ISPLAYING YSTEM
B M
ASIC ANAGEMENT
This chapter describes the following topics:

Displaying System Information

◆
including contact information.
Displaying Switch Hardware/Software Versions
◆
version, power status, and firmware versions
Configuring Support for Jumbo Frames
◆
frames.
Displaying Bridge Extension Capabilities
◆
parameters.
◆ Managing System Files
or configuration files, and set the system start-up files.
Setting the System Clock
◆
specified SNTP servers.
Console Port Settings
◆
◆ Telnet Settings – Sets Telnet connection parameters.
Displaying CPU Utilization
◆
Displaying Memory Utilization
◆
Resetting the System
◆
time, after a specified delay, or at a periodic interval.
I
NFORMATION
Use the System > General page to identify the system by displaying
information such as the device name, location and contact information.
CLI R
EFERENCES
"System Management Commands" on page 587
◆
"SNMP Commands" on page 629
◆
– 101 –
T
ASKS
– Provides basic system description,
– Enables support for jumbo
– Shows the bridge extension
– Describes how to upgrade operating software
– Sets the current time manually or through
– Sets console port connection parameters.
– Displays information on CPU utilization.
– Shows memory utilization parameters.
– Restarts the switch immediately, at a specified
– Shows the hardware