Installing The Power Unit - SELVA MARINE Grey Whale 200 EFI Service Manual

CAUTION:
Do not bend the terminals of the starter
motor leads when installing them.
14. Install the wiring harness onto the ECM
bracket, and then fasten it at the white
tape h.
15. Check that the wiring harness, hoses,
and other parts do not interfere with any
moving parts.

Installing the power unit

1. Retract the port and starboard top cowl-
ing lock levers.
6AL3J11
CAUTION:
h
Make sure that the top cowling lock levers
are retracted and the engine stoppers are
installed before installing the power unit,
otherwise the fuel rails could be dam-
aged.
S6AL5620
STBD
Cylinder block
PORT
1
2
3
S6AL5220
4
5
6
7
8
9
5-78