Installing The Ptt Motor - SELVA MARINE Grey Whale 200 EFI Service Manual

2. Fill the trim cylinders with the recom-
mended fluid to the correct level b as
shown.
Recommended PTT fluid:
ATF Dexron II
3. Install the trim ram assemblies into the
trim cylinders, and then tighten the trim
cylinder end screws 2 to the specified
torque.
WARNING
Do not push the trim rams down while
installing them into the trim cylinders.
Otherwise, the PTT fluid may spurt out
from the unit.
6AL3J11
Tilt cylinder and trim cylinder
Cylinder-end screw wrench:
90890-06568
Trim cylinder end screw 2:
160 N·m (16.0 kgf·m, 118.0 ft·lb)

Installing the PTT motor

CAUTION:
Do not use a rag when assembling the
PTT unit as dust and particles on the PTT
unit components can lead to poor perfor-
mance.
1. Install the joint 1 into the gear pump.
2. Fill the pump housing with the recom-
mended fluid to the correct level a as
shown.
Recommended PTT fluid:
ATF Dexron II
1
2
3
4
5
6
7
8
9
7-54