SELVA MARINE Grey Whale 200 EFI Service Manual page 206

LOWR
6. Install the propeller and propeller nut,
and then tighten the nut temporarily.
Place a block of wood between the anti-
cavitation plate and propeller to keep the
propeller from turning, and then tighten
the nut to the specified torque.
WARNING
• Do not hold the propeller with your
hands when loosening or tightening it.
• Be sure to disconnect the battery cables
from the battery and the clip from the
engine stop lanyard switch.
• Put a block of wood between the anti-
cavitation plate and propeller to keep
the propeller from turning.
NOTE:
If the grooves in the propeller nut 5 do not
align with the cotter pin hole, tighten the nut
until they are aligned.
Propeller nut 5:
54 N·m (5.4 kgf·m, 39.8 ft·lb)
6-21
Lower unit
7. Fill the gear oil to the correct level.
Recommended gear oil:
Hypoid gear oil
API: GL-4
SAE: 90
Gear oil quantity:
Regular rotation model:
3
1,150 cm
(38.9 US oz, 40.6 Imp oz)
6AL3J11