Backlash (Counter Rotation Model) - SELVA MARINE Grey Whale 200 EFI Service Manual

Shimming (counter rotation model) / Backlash (counter rotation model)
Magnet base B 0: 90890-06844
Dial gauge set A: 90890-01252
Propeller shaft free play:
0.25–0.35 mm (0.0098–0.0138 in)
Backlash
(counter rotation model)
Measuring the forward and reverse
gear backlash
1. Install the lower unit onto a repair stand.
2. Remove the water pump assembly.
3. Set the gear shift to the neutral position
at the lower unit.
Shift rod push arm: 90890-06052
4. Turn the lower unit so that it is positioned
as shown.
5. Install the special service tool.
6. Tighten the center bolt to the specified
torque while turning the drive shaft.
6AL3J11
6
NOTE:
The drive shaft can no longer be turned when
the center bolt is tightened to the specified
torque.
Bearing housing puller claw L 1:
90890-06502
Stopper guide plate 2: 90890-06501
Center bolt 3: 90890-06504
Center bolt 3:
7 N·m (0.7 kgf·m, 5.2 ft·lb)
7. Turn the lower unit back to its original
position.
2
3
1
S6AL6160
1
2
3
4
5
6
7
8
9
6-60