SELVA MARINE Grey Whale 200 EFI Service Manual page 113

CAUTION:
To prevent damage to the engine or tools,
screw in the puller set bolts evenly and
completely so that the flywheel puller is
parallel to the flywheel magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller: 90890-06521
7. Remove the stator assembly bolts, and
then move the stator assembly.
6AL3J11
8. Remove the timing belt, driven sprock-
ets, and camshafts.
NOTE:
To remove the timing belt, driven sprockets,
S6P25E00
and camshafts, see Chapter 5, "Removing
the timing belt, driven sprocket, and cam-
shaft."
9. Remove the valve shim 2 from the valve
lifter 3 using compressed air.
NOTE:
Do not mix the valve train parts. Keep them
organized in their proper groups.
10. Measure the valve shim thickness using
a micrometer, and then note the mea-
surement data.
Power unit (check and adjustment)
1
2
3
S6AL5110
4
5
6
7
8
9
5-12