Installing The Throttle Body - SELVA MARINE Grey Whale 200 EFI Service Manual

FUEL

Installing the throttle body

1. Connect the check valve to the hoses 1
and 2.
1
2
È To the intake silencer
2. Connect the hoses and fasten them.
3
É
Ê
4
4
Ë
È To the intake silencer
É To the pressure regulator
Ê To the atmosphere (top cowling lock)
Ë To the vapor separator
NOTE:
Fasten the pressure regulator hose 3 and
canister vent hose 4 to the holder.
3. Fasten the hoses 2 and 5 to the holder.
4-17
Fuel system
È
S6AL4210
È
2 1
3
S6AL4070
2
5
4. Install the throttle body.
5. Connect the hoses and fasten them.
NOTE:
Fasten the pressure regulator hose 3 and
vapor separator hose 6 to the holder.
6. Fasten the wiring harness to the holders.
7. Fasten the vapor gas hose 7 and fuel
hose 8 to the holder.
5
2
S6AL4220
3
6
6
3
S6AL4230
6AL3J11