Maintenance Specification; Power Unit - SELVA MARINE Grey Whale 200 EFI Service Manual

SPEC

Maintenance specification

Power unit

Item
Power unit
Minimum compression
(*1)
pressure
(*2)
Oil pressure
Timing belt
Timing belt installation height
Timing belt-to-timing belt guide
clearance
Cylinder head
Warpage limit
(lines indicate straightedge
position)
Camshaft cap inside diameter
Cylinder
Bore size
Piston
Piston diameter (D)
Measuring point (H)
(*3)
Piston clearance
Piston pin boss bore
Piston ring groove
Top ring
Second ring
Oil ring
Piston pin
Outside diameter
(*1)
Measuring conditions:
Ambient temperature 20 °C (68 °F), wide open throttle, with spark plugs removed from all cylinders.
The figures are for reference only.
(*2)
For details of the checking method, see Chapter 5, "Checking the oil pressure."
The figures are for reference only.
(*3)
The figures are for reference only.
2-3
Specification
Unit
kPa
(kgf/cm
kPa
(kgf/cm
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
mm (in)
200 R
2
, psi)
600 (6.0, 87.0) at 600–900 r/min
2
, psi)
1.0 ± 0.5 (0.04 ± 0.02)
25.000–25.021 (0.9843–0.9851)
94.000–94.017 (3.7008–3.7014)
93.921–93.941 (3.6977–3.6985)
0.075–0.080 (0.0030–0.0031)
21.017–21.031 (0.8274–0.8280)
1.23–1.25 (0.048–0.049)
1.22–1.24 (0.048–0.049)
2.51–2.53 (0.099–0.100)
20.995–21.000 (0.8266–0.8268)
Model
200 L 225 R
740 (7.4, 107.3)
2.0 (0.08)
0.1 (0.0039)
5.0 (0.20)
2
225 L
6AL3J11