TRBL
SHTG
Troubleshooting the power unit
using the diagnostic flash indicator
1. Connect the special service tool to the
outboard motor as shown.
L/W
NOTE:
When performing this diagnosis, all of the
electrical wires must be properly connected.
Diagnostic flash indicator B:
90890-06865
2. Start the engine and let it idle.
3. Check the flash pattern of the special
service tool to determine.
• Trouble code indication
Example: Normal condition
(no defective part or irregular process-
ing is found)
a: Light on, 0.33 second
b: Light off, 4.95 seconds
9-17
Troubleshooting
S6AL9020
• Trouble code indication
Example: The illustration indicates
code numbers 23 and 113.
a: Light on, 0.33 second
b: Light off, 4.95 seconds
c: Light off, 0.33 second
d: Light off, 1.65 seconds
1
1
c
a
d a
d
a
4. If a flash pattern listed in the trouble code
chart is displayed, check the malfunction-
ing part according to the flash pattern.
3
a
a
b
S6P29040E
6AL3J11