SELVA MARINE Grey Whale 200 EFI Service Manual page 120

POWR
23. Adjust the timing belt to the specified
installation height r.
Timing belt installation height r:
2.0 mm (0.08 in)
24. Check that belt position marks h through
p are aligned with each alignment mark
on the drive sprocket and driven sprock-
ets, and then remove the pin 9.
9
25. Turn the crankshaft clockwise 2 full turns,
and then check that alignment marks c
through f are aligned.
5-19
Power unit
r
S6P25250
S6P25260E
d
f
e
26. Install the stator assembly.
27. Install the Woodruff key 0, then the fly-
wheel magnet A.
u
v
E
v
A
t
NOTE:
• Be sure to remove any grease from the
tapered portion of the crankshaft s and fly-
wheel magnet t.
• Apply engine oil to the thread u of the fly-
wheel magnet nut and washer v before
installation.
c
S6P25180
A
0
S6AL5690
6AL3J11
s