SELVA MARINE Grey Whale 200 EFI Service Manual page 157

Cylinder head bolt 1–8 (M10):
1st: 23 N·m (2.3 kgf·m, 17.0 ft·lb)
2nd: 45 N·m (4.5 kgf·m, 33.2 ft·lb)
3rd: Loosen completely
4th: 23 N·m (2.3 kgf·m, 17.0 ft·lb)
5th: 45 N·m (4.5 kgf·m, 33.2 ft·lb)
6th: 90°
Cylinder head bolt 9–A (M8):
1st: 14 N·m (1.4 kgf·m, 10.3 ft·lb)
2nd: 28 N·m (2.8 kgf·m, 20.7 ft·lb)
3. Install new filters and the oil control valve
assemblies.
CAUTION:
Do not reuse the oil control valve filters,
always replace them with new ones.
NOTE:
Make sure that the oil control valve filter does
not come off when installing the oil control
valve.
4. Install the camshafts, driven sprockets,
and timing belt.
NOTE:
To install the camshafts, driven sprockets,
and timing belt, see Chapter 5, "Installing the
camshaft, driven sprocket, and timing belt."
6AL3J11
Cylinder head
1
2
3
4
5
6
7
8
9
5-56