Checking The Timing Belt And Sprocket; Checking The Valve Lifter - SELVA MARINE Grey Whale 200 EFI Service Manual

PORT UP
!
!
# #
±
±
$ $
CAUTION:
Do not reuse the bolts with seal washers
0, always replace them with new ones.
NOTE:
See the exploded diagram (5-7).
16. Remove the valve lifters from the cylinder
heads.
NOTE:
Do not mix the valve train parts. Keep them
organized in their proper groups.
Checking the timing belt and
sprocket
1. Check the interior and exterior of the tim-
ing belt. Replace if cracked, damaged, or
worn.
6AL3J11
STBD
!
# $
± #
$ %
±
S6P25530
9
0
8
0
S6AL5G00
Power unit (check and adjustment)
2. Check the drive sprocket. Replace the
crankshaft assembly if cracked, dam-
aged, or worn.
3. Check the driven sprockets. Replace the
variable camshaft timing assembly or
driven sprocket if cracked, damaged, or
worn.

Checking the valve lifter

1. Check the valve lifters. Replace if dam-
aged, scratched, or worn.
2. Measure the valve lifter outside diameter.
Replace if out of specification.
a
Valve lifter outside diameter a:
32.982–32.997 mm
(1.2985–1.2991 in)
1
2
3
4
5
S6AL5B40
6
7
8
9
5-24