SELVA MARINE Grey Whale 200 EFI Service Manual page 117

8
NOTE:
To remove the wiring harness guide, see
Chapter 5, "Removing the wiring harness."
12. Loosen the flywheel magnet nut.
CAUTION:
Apply force in the direction of the arrows
shown to prevent the flywheel holder from
slipping off easily.
NOTE:
Use a 36 mm socket wrench to loosen the fly-
wheel magnet nut.
Flywheel holder: 90890-06522
13. Remove the flywheel magnet and Woo-
druff key.
6AL3J11
S6AL5160
CAUTION:
To prevent damage to the engine or tools,
screw in the puller set bolts evenly and
completely so that the flywheel puller is
parallel to the flywheel magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Power unit (check and adjustment)
Flywheel puller: 90890-06521
1
2
3
4
S6P25E00
5
6
7
8
9
5-16