CHK
ADJ
Top cowling
Checking the top cowling
1. Check the fitting by pushing the cowling
with both hands. Adjust if necessary.
2. Loosen the bolts 1.
3. Move the hook 2 up or down slightly to
adjust its position.
NOTE:
• To loosen the fitting, move the hook 2 in
direction a.
• To tighten the fitting, move the hook 2 in
direction b.
4. Tighten the bolts 1.
5. Check the fitting again and, if necessary,
repeat steps 2–4.
6. Check the top cowling hoses. Replace if
cracked or damaged.
3-3
Periodic check and adjustment
3
Fuel system
Checking the fuel joint and fuel hose
(fuel joint-to-fuel injector)
1. Remove the flywheel magnet cover, port
intake manifold, and fuel rail covers (port
and starboard).
NOTE:
See the exploded diagram (4-9, 4-23).
2. Check the low-pressure fuel hose con-
nections. Also, check the fuel filter 1,
low-pressure fuel pump 2, filter 3,
check valve 4, and fuel cooler 5.
Replace the low-pressure fuel hose con-
nections if there is leakage or deteriora-
tion.
3. Check the high-pressure fuel hose con-
nections. Also, check the vapor separa-
tor 6, pressure regulator 7, fuel rails 8,
and fuel injectors 9. Replace the high-
pressure fuel hose connections if there is
leakage or deterioration.
1
7
8
3
4
2
6
3
8
9
5
S6AS3030
6AL3J11