Checking The Fuel Rail; Installing The Fuel Injector - SELVA MARINE Grey Whale 200 EFI Service Manual

Checking the fuel rail

1. Check the fuel rails. Replace the fuel rail
if cracked or deformed.
NOTE:
• To reduce the fuel pressure, see Chapter 4,
"Reducing the fuel pressure."
• To check the fuel injectors, see Chapter 8,
"Checking the fuel injector."

Installing the fuel injector

1. Apply engine oil to new O-rings, and then
install them onto the fuel injectors.
2. Install the fuel injectors 1 onto the port
fuel rail 2, and then install the holders 3
as shown.
2
1
3
3. Install the fuel injectors 4 onto the star-
board fuel rail 5, and then install the
holders 6 as shown.
6AL3J11
E
S6P24330
1
3
2
S6AL4130
5
6
4
4. Install the fuel rails onto the cylinder
heads.
5. Tighten the bolts 7 equally and gradu-
ally.
7
6. Connect the fuel injector couplers.
Fuel injector
6
4
5
S6AL4140
7
S6AL4150
4-24
1
2
3
4
5
6
7
8
9