SELVA MARINE Grey Whale 200 EFI Service Manual page 121

28. Tighten the flywheel magnet nut to the
specified torque.
Flywheel holder: 90890-06522
Flywheel magnet nut:
240 N·m (24.0 kgf·m, 177.0 ft·lb)
29. Check the crank position sensor air gap
w.
w
NOTE:
It is recommended to check the crank posi-
tion sensor air gap before installing the wiring
harness guide to improve working efficiency.
Crank position sensor air gap w:
1.4–1.6 mm (0.055–0.063 in)
Crank position sensor screw:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
30. Install the timing belt guides B, and then
adjust the timing belt-to-timing belt guide
clearance x.
6AL3J11
31. Install the wiring harness guide.
NOTE:
To install the wiring harness guide, see
Chapter 5, "Installing the wiring harness."
32. Install all parts removed during disas-
S6AL5130 sembly.
33. Check that the wiring harness, hoses,
and other parts do not interfere with any
moving parts.
Power unit (check and adjustment)
B
x
B
x
Timing belt-to-timing belt guide
clearance x:
1.0 ± 0.5 mm (0.04 ± 0.02 in)
B
1
2
3
S6AL5120
4
5
6
7
8
9
5-20