Removing The Wiring Harness - SELVA MARINE Grey Whale 200 EFI Service Manual

POWR
16. Suspend the power unit from the engine
hangers L.
17. Remove the power unit by removing the
bolts M and N.
L
L
M
M

Removing the wiring harness

NOTE:
When removing the wiring harness and wir-
ing harness guide, the fuel line must be dis-
connected, so be sure to reduce the fuel
pressure before performing the disassembly
procedure. To reduce the fuel pressure, see
Chapter 4, "Reducing the fuel pressure."
1. Remove the joint connector 1 from the
wiring harness guide.
1
2. Disconnect the oil control valve couplers
2, engine temperature sensor coupler
3, and thermoswitch connectors 4.
5-41
Power unit
M
N
N
M
M
M
N
S6AL5230
S6P25380
3. Remove the engine temperature sensor
coupler 3 and low-pressure fuel pump
coupler 5 from the wiring harness guide.
4. Remove the 3-pin communication cou-
pler 6 and diagnosis connector 7 from
the bracket.
4
5
6
STBD
5. Remove the fuel rail covers (port and
starboard) and plastic ties.
NOTE:
See the exploded diagram (4-23).
6. Disconnect all fuel injector couplers.
7. Disconnect the quick connectors 8 and
remove the high-pressure fuel hose
assembly (vapor separator-to-starboard
fuel rail).
8
PORT
3
2
7
S6P25390
4
2
S6AL5700
8
S6AL5710
6AL3J11