Removing The Propeller Shaft Housing Assembly; Disassembling The Propeller Shaft Housing - SELVA MARINE Grey Whale 200 EFI Service Manual

LOWR
Removing the propeller shaft
housing assembly
1. Remove the water pipe 1 and shift rod
2.
2. Remove the bolts 3, ring 4, and bolts
5.
3. Remove the propeller shaft housing with
the propeller shaft.
NOTE:
Before removing the propeller shaft from the
lower case, remove the shift rod.
6-37
Lower unit
Slide hammer 6: 90890-06531
Puller head 7: 90890-06514
Disassembling the propeller shaft
housing
1. Remove the spring 1, and then remove
the cross pin 2, dog clutch 3, slider,
shift plunger, and shift rod joint.
2
3
2. Remove the forward gear and forward
gear shim(s) from the propeller shaft
housing using a press.
Bearing separator 4: 90890-06534
3. Remove the dowel 5 from the lower
case.
4. Install the propeller shaft housing assem-
bly in the reverse direction into the lower
case.
1
S69J6375
6AL3J11