SELVA MARINE Grey Whale 200 EFI Service Manual page 182

POWR
15. Install the grommet with the speedome-
ter hose P, fuel hose Q, positive battery
cable N, negative battery cable O, shift
cable R, gauge harness S, throttle
cable T, and 10-pin main harness U.
16. Install the cable holder V and retaining
plate W.
17. Connect the shift cable and throttle
cable, and then adjust their lengths.
NOTE:
To adjust the shift cable and throttle cable,
see Chapter 3, "Adjusting the throttle cable"
and "Checking the gear shift operation."
18. Install the starboard intake manifold.
NOTE:
To install the intake manifold, see Chapter 4,
"Installing the intake manifold."
19. Install all the parts that were removed.
5-81
Power unit
6AL3J11