11. Removing the PTT switch coupler C,
isolator coupler D, water detection
switch coupler (blue) E, warning indica-
tor coupler F, LAN communication cou-
pler (white) G, 10-pin main harness
coupler H, and trim sensor coupler I
from the brackets, and then disconnect
them.
E
D
C
F
12. Remove the speed sensor coupler J
from the bracket, and then disconnect it.
13. Disconnect the flushing hose K.
J
K
14. Remove the aprons and upper case
cover.
6AL3J11
15. Retract the port and starboard top cowl-
I
H
G
S6AL5210
S6AL5200
Make sure that the top cowling lock levers
are retracted and the engine stoppers are
installed before removing the power unit,
otherwise the fuel rails could be dam-
aged.
ing lock levers.
STBD
CAUTION:
Power unit
1
2
3
4
PORT
5
6
7
S6AL5220
8
9
5-40