Replacement Of Engine Oil; Replacement Of Engine Oil Filter; Recommended Sae Viscosity Numbers - Mazda 121 Workshop Manual

SCHEDULED MAINTENANCE SERVICES
Recommended SAE viscosily numbers
Typical specitication: API service SD, SE or SF
REPLACEMENT OF ENGINE OIL
'l. Warm up the engine.
2. Drain the oil by removing the drain plug and oilfiller cap.
Warning
. Walt a while fo. the engine is too hot,
And be caretul to drain.
3. Reinstall the drain plug securely.
Tightening torque:
29-41 Nm (3.0-4.2 m-kg, 22-30 ft-lb)
4. Refillthe engine with the specified oiltothe "F" levelmarked
on the level gauge.
5. Refit the oil iiller cap securely.
Oil pan capacity:3.0 liters (3.2 US qt, 2.6 lmp qt)
REPLACEMENT OF ENGINE OIL FILTER
1. Remove the oil filter with the SST a suitable wrench.
2. lJse a clean rag to wipe off the mounting sudace on the
engine.
3. Apply a small amount of clean engine oilio the rubber seal
ol the new filter.
4. Install the oil filter and tighten it by hand until the rubber
seal contacts the base.
5. Tighten the fllter 1 and 1/6 turns with a filter wrench.
6. Start the engine and check for leaks.
7. Check the oil level and add oil if necessary.
Oil filler capaclty
83: 0.17 liter (0.18 US ql, 0.15lmp qt)
(.c)
eF)
-30 -m -10
0 10
20 30 40 50
Engine oil
5W.30
v
30
'
5w-rd->
:
10w-30
A-7