Camshaft Pulley; Timing Belt Pulley - Mazda 626 MX-6 Workshop Manual

86U01X-159
Mating marks
86U01X-160
ASSEMBLY (TIMING BELT)

Camshaft Pulley

1. Install the camshaft pulley on the camshaft with the
dowel pin fit into the hole at the " f i " mark.
2. Tighten the camshaft pulley bolt.
Tightening torque:
47—65 Nm (4.8—6.6 m-kg, 35—48 ft-lb)
3. Align the " f1 " mark on the pulley with the align­
ment mark on the front housing.

Timing Belt Pulley

1. Reverse the direction of the SST (ring gear brake).
2. Install the crankshaft key.
3. Install the timing belt pulley on the crankshaft.
Tightening torque: 157—167 N m
(16.0—17.0 m-kg, 116—123 ft-lb)
4. Release the ring gear brake.
5. Align the timing belt pulley and the pump body
alignment marks.
1