Time Setup; Figure 2.25 Date And Time Setting Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.7 Library Information Setup
2.7.2

Time Setup

If the library is set up for the first time the library clock needs to be set.
The clock is required so that the time can be recorded in the error information.
Changing the time zone requires a library restart.
If the library cannot be restarted, click the [Back] button to cancel the changed time zone, set the library in
the status to enable library restart, and then change the time zone.
Procedure
1
Click the [Time] button from the Setup menu.
SETUP menu
+Time
2
Use the numeric keypad to enter the values of Date (year, month, and day) and Time (hour
and minute). If the entries are completed, click the [Next] button.
Years that can be entered are 2005 to 2037.
3
Use the up arrow or down arrow button (
Table 2.7

Figure 2.25 Date and time setting window

4
A confirmation window is displayed.
Click the [OK] button to proceed.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
lists the values used to specify world time zones.
Copyright 2020 FUJITSU LIMITED
or ) to set the time zone.
▲ ▼
48
P3AM-6932-06ENZ0