Polycom RealPresence 4000 Administrator's Manual page 76

Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator's Guide
2-40
Table 2-17 New AVC CP Profile - Video Settings Parameters (Continued)
Field/Option
Telepresence Mode
(CP only)
Telepresence Layout
Mode
(CP only)
Table 2-18 Auto Layout – Default Layouts in CP Conferences
Number of Video Participants
0–2
3
4–5
Description
Select the Telepresence Mode from the drop-down menu:
•
Off - Normal conference video is sent by the RMX.
•
Auto (Default) - If any ITP (Immersive Telepresence) endpoints
are detected, ITP features are applied to the conference video for
all participants.
When Auto is selected, the ITP features are dynamic. If all ITP
endpoints disconnect from the conference, normal conference
video is resumed for all participants. ITP features are resumed for
all participants should an ITP endpoint re-connects to the
conference.
•
On - ITP features are applied to the conference video for all
participants regardless of whether there are ITP endpoints
connected or not.
Notes:
•
This field is enabled only if the RMX system is licensed for
Telepresence Mode.
•
Telepresence Mode is unavailable in Video Switching conferences.
The Telepresence Layout Mode drop-down menu enables VNOC
operators and Polycom Multi Layout Applications to retrieve
Telepresence Layout Mode information from the RMX.
The following modes can be selected:
•
Manual
•
Continuous presence - Room Continuous Presence (Default)
•
Room Switch - Voice Activated Room Switching
Note: This field is enabled only if the RMXsystem is licensed for
Telepresence Mode.
Auto Layout Default Settings
Polycom, Inc.