Configuring Video Connections; Configuring The Camera Connection - RADVision scopia xt5000 series Administrator's Manual

Configuring Video Connections

There are a number of settings which affect the way the camera accepts input and the way the monitors
display video.
Navigation
•

Configuring the Camera Connection

•
Setting up the Monitor Display Modes
Configuring the Camera Connection
About this task
You configure the connection depending on the type of camera and its functionality. This includes
configuring the Scopia XT Camera Switch. You can do this procedure from the endpoint itself or from the
XT Series web interface.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Maintaining the Scopia XT Series Locally from the Endpoint
Connect the video equipment, as described in Installation Guide for Scopia XT Series.
Procedure
1. Access the camera settings as follows:
Administrator Guide for Scopia XT5000 Series Version 3.2
• From the endpoint's main menu, select Configure > Advanced > I/O connections >
Cameras > General.
• From the XT Series web interface, select Administrator settings > I/O connections >
Cameras > General.
on page 71
on page 75
on page 44.
Initial Configuration | 71