Configuring The Scopia Xt Series To Block Its Video Input By Default - RADVision SCOPIA XT5000 Series User Manual

Step 3
Select General under Call-Answer.
Step 4
Set Do Not Disturb to Yes.
Step 5
Select Save.

Configuring the SCOPIA XT Series to Block Its Video Input by Default

You can configure the SCOPIA XT Series to block video transmission from your local endpoint at
the start of each call.
When configured in this way, the system sends a pre-defined image to the remote endpoint. The
from your local endpoint.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select the User Settings tab.
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Figure 4-3
icon appears on your display, indicating that the remote endpoint no longer receives video
The call-answer settings
Tailoring Your User Experience | 22