Modifying The System's Name On The Titlebar - RADVision scopia xt5000 series Administrator's Manual

2. Enter the name of the Scopia XT Series in the System Name field.
3. Select the required language from the Language list.
4. From the web interface only, select Save.

Modifying the System's Name on the Titlebar

About this task
This procedure describes how to configure the endpoint to use an alternate system name, such as the
SIP username, on the titlebar
as part of the quick setup from the endpoint itself, as described in
Language
The name displayed on the monitors participating in the videoconference (for example: John-Smith, or
9th-Floor-Room, or NY-Office) is based on the protocol of the call. If you are connecting over SIP, your
system's SIP username is used, while if you are connecting over H.323, your system's H.323 name is
used. For more information, see
Registering the Scopia XT Series with a Gatekeeper
Administrator Guide for Scopia XT5000 Series Version 3.2
(Figure 33: Scopia XT Series's titlebar
on page 56.
Registering the XT Series to a SIP Server
Figure 32: Basic Settings page
Setting the System Name and
on page 96.
on page 64). You can also do this
on page 99 and
Initial Configuration | 63