Voice Mail Waiting Indicator; Using The Security Menu; Locking The Keypad; Changing The Pin - Toshiba IP4100 Series User Manual

Voice Mail Waiting
Indicator
Using the Security
Menu
Locking the
Keypad
Changing the
PIN

Using Alarms

Setting the
Alarm
IP4000-series UG November, 2011
When you have new messages, the STATUS LED turns green, red, or yellow,
according to the settings you selected in the LED signal menu
page 8). After you listen to all new messages, the STATUS LED turns off.
The Security menu lets you configure the keypad to automatically lock if the
handset remains idle and change the PIN used to deregister or reset the handset.
While the keys are locked, you will not be able to use any handset functions that
require a key press, including making and receiving calls. You can still dial
emergency numbers (911) while the keys are locked.
1. From the main menu screen, select the Settings icon.
2. On the Settings screen, select Security, then select Automatic keylock.
3. Select the amount of time (from 15 seconds to 5 minutes) you want the
handset to wait before it locks the keypad, or select Off to have the handset
never lock the keypad.
If the handset is idle for the amount of time you selected, it locks the keys. To
unlock the keypad, press Select followed by
until it remains inactive for the amount time selected above.
You must enter the PIN to deregister the handset or reset it to factory default
settings. Do not change the PIN without notifying your system administrator!
1. From the main menu screen, select the Settings icon.
2. On the Settings screen, select Security.
3. Select Change PIN. The handset prompts you to enter the current PIN.
4. Enter the four digits of the current PIN and press Select. The handset prompts
you to enter the new PIN.
5. Enter the four digits you want to use as the new PIN and press Select.
You can set two alarms on your handset: a one-time alarm and a recurring alarm.
1. From the main menu screen, select the Alarms icon.
2. For a one-time alarm, select Alarm; for a repeating alarm, select Recurrent
alarm.
3. Set the time you want the alarm to sound.
• Enter the time using the twelve-key dial pad, or use Up and Down to
select the time.
• Select AM or PM.
Press Save when you're finished.
•
4. For a recurrent alarm, the handset prompts you to select the days of the week
you want the alarm to sound.
TOSHIBA
IPedge & Strata CIX
Using Common Features
("Signal Status" on
*
. The keypad will remain unlocked
19