Program *32 - Rs-232 Voice Mail Message Center Port - Toshiba Strata DK14 Programming Manual

Program *32 – RS-232 Voice Mail Message Center Port
Processor Type:
Program Type:
Initialized Default:
ÃÆ Æ ! "  Tƒx…
SELECT = Station Logical Port Number
(see ranges below)
Enter the port number having a Message
Center assigned. Enter all station ports
using the same Voice Mail machine.
To add a port range, enter XXX
(low port high port).
Processor Type
DK14
DK40i
RCTUA
Port MW Center Port
Program *32 Overview
This program assigns which Voice Mail Message Center port number will be called when a station
user presses the flashing
Voice Mail Port Message Center must be assigned for each station. The Message Center port must
be the lowest voice mail standard telephone port in the Program 31 Voice Mail Group. It is
normally the same port for all stations.
Strata DK Programming 5/99
DK14, DK40i, All RCTUs
Station
Blank
" ! C‚yq  Tƒx…
XXX
Port Range
008~009
008~027
000~031
Port MW Center Port
0VJ
button. When using SMDI or DTMF voice mail integration, the
Program *32 – RS-232 Voice Mail Message Center Port
Æ C‚yq  Tƒx… Æ Æ C‚yq
VM PORT = Voice Mail Message Port
Enter the Voice Mail Message Center Port
number (see ranges below) that should be
assigned to each station.
Enter the lowest KSTU2, QSTU2 or RSTU2 port
number that is connected to the VM machine.
If VM ports are assigned to a Distributed Hunt
(DH) Group in Program *40, enter the port
number of the first DH Group member, not the
DH Group port (900~915). See example following
Processor Type Port Range
RCTUBA/BB 000~079
RCTUC/D 000~239
RCTUE/F 000~335
Port MW Center Port
System & Station
 Tƒx… Æ Æ C‚yq
Port MW Center Port
3-89