Replacement 13 Low Voltage Power Supply (Pl9.1.4) - Dell 3110cn Service Manual

Hide thumbs Also See for 3110cn:

Table of Contents

Replacement 12 PRINT HEAD (PL5.1.99)

Pass the connector of the PRINT HEAD through the hole on the SHIELD MCU, and then

replace the CORE to the harness of the PRINT HEAD.

Engage the connector (P/J12) of the PRINT HEAD with the connector on the MACHINE CON-

Go to the next replacement step:

Replacement 13 LOW VOLTAGE POWER SUPPLY (PL9.1.4)

Version 3 2007.03.15

Chapter 3 Removal and Replacement Procedures (RRPs)

Table of Contents