Bead-Carry-Out (Bco) - Dell S2810dn User Manual

Action
2a
Enable the Non-Dell Toner option.
Launch the Tool Box, and click Service Tools on the Printer
a
Maintenance tab.
Ensure that the On check box under Non-Dell Toner is selected.
b
Does this solve your problem?
2b Replace the drum cartridge and the toner cartridge.
Remove the drum cartridge. See "Removing the Drum Cartridge."
a
Install a drum cartridge and a toner cartridge using a Dell toner.
b
After you replace the drum cartridge and the toner cartridge, Launch
c
the Tool Box.
Click Report on the Printer Setting Reports tab.
d
Click Demo Page.
e
The demo page is printed.
Does this solve your problem?
3 Replace the drum cartridge.
Replace the drum cartridge. See "Replacing the Drum Cartridge."
a
After you replace the drum cartridge, click Report on the Printer
b
Setting Reports tab.
Click Demo Page.
c
The demo page is printed.
Does this solve your problem?

Bead-Carry-Out (BCO)

Action
1 If the printer is installed in a high altitude location, set the altitude of
the location.
Launch the Tool Box, and click Service Tools on the Printer
a
Maintenance tab.
Under Adjust Altitude, select the value close to the altitude of the
b
location where the printer is installed.
Click Report on the Printer Setting Reports tab.
c
Click Demo Page.
d
The demo page is printed.
Does this solve your problem?
Yes No
The task is complete. Go to action 2b.
The task is complete. Contact Dell.
The task is complete. Contact Dell.
Yes No
The task is complete. Go to action 2.
Troubleshooting Guide
301