Bead-Carry-Out (Bco) - Dell E525w User Manual

Fog
Action
1
Is the whole page printed light?
2 Start Clean Developer.
Launch the Tool Box, and click Clean Developer on the Printer
a
Maintenance tab.
Click Start.
b
Is the problem recovered?
3 Start Toner Refresh Mode.
Launch the Tool Box, and click Toner Refresh Mode on the Printer
a
Maintenance tab.
Select the color that is the same as the fog.
b
Is the problem recovered?
4
Start Toner Refresh Mode again.
Is the problem recovered?

Bead-Carry-Out (BCO)

Action
1
If the printer is installed in a high altitude location, set the altitude of
the location.
Launch the Tool Box, and click Environmental Sensor Info on the
a
Printer Maintenance tab.
Click Adjust Altitude.
b
Select the value close to the altitude of the location where the printer
c
is installed.
Is the problem recovered?
296
Troubleshooting
Yes No
Contact Dell. Go to action 2.
The task is complete. Go to action 3.
The task is complete. Go to action 4.
The task is complete. Contact Dell.
Yes No
The task is complete. Contact Dell.