To link the trays, load only the same size and type of print media in each tray. Set the paper size and type for each tray.
To disable tray linking, choose either a unique paper size/ type for each tray or use the operator panel, as follows:
1. Press Menu (
2. Press Scroll (
3. Press Scroll (
4. Press Scroll (
5. Press Scroll (
and press Select (
6. Press Cancel (
This setting is used to determine whether the printer can substitute another paper size when the requested paper size is not available in any of the input
trays. The Printer will substitute A4/Letter, A5/Statement, and B5/JIS B5. For example, if A4 is the requested paper size and there is no A4 paper in any of the
input source, then the printer will print on Letter size paper, if available.
When the substitute size is set to Off, it means no substitution is allowed for the requested paper size.
Multi-purpose Feeder can be configured to behave in Tray mode or in Bypass mode by setting the Configure MPF menu in the operator Panel.
In this mode, the printer pulls the paper from the Multi-purpose Feeder first unless it is closed or empty. The Multi-purpose Feeder gets the highest priority
and pulls whatever material is in the Multi-purpose Feeder.
In this mode, the Multi-purpose Feeder is treated as another papertray; the printer pulls paper from the tray that matches the size and type. First preference
goes to the default source.
Downloaded from ManualsPrinter.com Manuals
) to highlight Paper Setup and press Select (
) to highlight Tray Behavior and press Select (
) to highlight Tray Linking and press Select (
) to Off to disable tray linking
) to return to Standby mode.