Loading Print Media In The Multipurpose Feeder (Mpf) - Dell H625cdw User Manual

• When printing on envelopes, set the print media source to the tray. From the print
driver, select Envelope for the paper type, and then select the correct size of the
envelope.
• Adjust the paper guides accordingly after envelopes are loaded.
Envelope #10, Monarch, or DL
Load the envelopes with the flaps closed and the print side facing up. Make sure that the
flaps are on the left side when you face towards the printer.
C5
When loading envelopes with the flaps open, load the envelopes so that the print side
faces up and the bottom edge (the edge with no flaps) enters the printer first.
When loading envelopes with the flaps closed, load the envelopes so that the print side
faces up and the top edge (the edge with flaps) enters the printer first.

Loading Print Media in the Multipurpose Feeder (MPF)

NOTE:
• Do not add or remove print media when there is still print media in the MPF or when the printer is
printing from the MPF. This may result in a paper jam.
• Do not place objects on the MPF.
• Do not apply excessive force on the MPF or press it down.
• If a jam occurs with print media, feed one sheet at a time through the MPF.
• The label on the MPF shows how to load the MPF with paper, and how to turn an envelope for
printing.
Loading Print Media
199
|