Table of Contents
Advertisement
Avertissement! Ne pas utiliser ni modifier le câble d'alimentation secteur fourni, s'il ne correspond pas exactement
au type requis.
Warnung! Versuchen Sie nicht, das mitgelieferte Netzkabel zu verändern oder zu verwenden, wenn es sich nicht
um genau den erforderlichen Typ handelt.
Avvertenza! Non modificare o utilizzare il cavo di alimentazione in c.a. fornito dal produttore, se non corrisponde
esattamente al tipo richiesto.
¡Advertencia! No intente modificar ni usar el cable de alimentación de corriente alterna, si no corresponde
exactamente con el tipo requerido.
In some cases, there will be no power cord, or the power cord supplied with this system may not be compatible
with the AC wall outlet in your region. If either case is true, you must obtain a suitable power cord that meets
the following criteria:
• The cord must be rated for use at the AC voltage available, with a current rating that is at least 125% of the
current rating of the product (for current rating information, refer to the regulatory label affixed to the
product).
• The AC plug end must be terminated in a grounding-type male plug designed for use in your region. The plug
ends must be labeled or marked to indicate they have been certified by an agency acceptable in your region.
• The power service must be connected through a properly grounded outlet.
• The connector at the product end must be an IEC 320, sheet C13, female connector (or the equivalent EN
60 320 connector).
• The cord must be less than 14.8 feet (4.5 meters) long and, for use in Europe, be created with <HAR>
(harmonized) or VDE certified cordage.
Cautions
Electrostatic discharge (ESD) can damage system components. Do the described procedures only at an ESD
workstation. If no such station is available, you can provide some ESD protection by wearing an antistatic wrist
strap and attaching it to a metal part of the computer chassis.
What is a Dialogic
A BorderNet 500 Gateway is a device that processes traffic using the SIP protocol (see RFC 3261). The BorderNet
500 Gateway receives SIP requests, processes them according to the rules you have set up, and forwards them
to the receiver.
The BorderNet 500 Gateway connects to an existing enterprise firewall through a DMZ (demilitraized zone) port,
enabling the transmission of SIP-based communications without affecting firewall security. SIP messages are
then routed through the firewall to the private IP addresses of authorized users on the internal network.
The BorderNet 500 Gateway can also be used as an extra gateway to the internal network without connecting
to the firewall, transmitting only SIP-based communications.
The BorderNet 500 Gateway connects your SIP-based VoIP network to the PSTN or to your PBX through a
®
®
Dialogic
Diva
Media Board.
®
BorderNet™ 500 Gateway?
®
What is a Dialogic
BorderNet™ 500 Gateway?
Page 9
Advertisement
Table of Contents
