Slant Check Menu; Single Head Menu - MUTOH ValueJet VJ-1638UH Operation Manual

VJ-1638UH OPERATION MANUAL
5.3.7

Slant Check menu

Sets up slanting detection during media loading.
Setup item
Media Slant
5.3.8

Single Head menu

You can set whether or not to perform printing using only one Print head.
NOTE
• This printer has 2 Print heads inside Print head unit.
• Even if "Head 1" or "Head 2" is set, when performing the Test print menu, the both Print heads are
used for printing.
Setup item
Single head
5.3 Setup menu
Setting
<Off>
On
—
Setting
<Off>
Head1
Head2
—
Description
Slant Check is not performed.
Slant Check is performed.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.3 Setup menu
Description
Both Print heads are used for printing.
Only left Print head is used for printing
Only right Print head is used for printing.
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting value and shifts to the
previous menu.
5.3 Setup menu
5 Panel setup menu
261