4.9.13 Storm Control Configuration
Storm control for the switch is configured on this Page. There is a unicast storm rate control, multicast storm rate control, and a
broadcast storm rate control. These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC
Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch.
The Storm Control Configuration screen in
Figure 4-9-15
appears.
Figure 4-9-15: Storm Control Configuration Page Screenshot
The Page includes the following fields:
Object
Description
223
Need help?
Do you have a question about the NS4702-24P-4S-4X and is the answer not in the manual?
Questions and answers