The Managed Switch performs "Store and Fforward" therefore, no error packets occur. More reliably, it reduces the
re-transmission rate. No packet loss will occur.
5.5 Auto-Negotiation
The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth
when a connection is established with another network device (usually at Power On or Reset). This is done by detect the modes and
speeds at the second of both device is connected and capable of, both 10Base-T and 100Base-TX devices can connect with the
port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in Full-duplex mode.
408
Need help?
Do you have a question about the NS4702-24P-4S-4X and is the answer not in the manual?