Point-To-Point Link Over Atm - Nokia Voyager Reference Manual

5
Configuring Interfaces

Point-to-Point Link over ATM

Configuring an ATM Interface
Note
An ATM interface cannot be configured with an IP address until at least
one logical interface has been created for it.
1. Click C
2. Click the Interfaces link.
3. Click the physical interface link you want to configure in the P
column on the Interface Configuration page.
Example—
atm-s2p1
This action takes you the Physical Interface page.
4. Select SONET or SDH as the framing format in the P
C
Note
SONET
supports them.
The setting should match the type of transmission network to which the
interface is connected.
5. Select F
P
128
on the home page.
ONFIG
table.
ONFIGURATION
SDH
and settings are available only if the ATM interface card
or L
REERUN OOP
C
HYSICAL ONFIGURATION
T
as the transmit clock choice in the
IMING
table.
HYSICAL
HYSICAL
Voyager Reference Guide