Creating An Ipsec Policy - Nokia Voyager Reference Manual

10
Configuring Security and Access

Creating an IPsec Policy

Choosing IPv4 or IPv6 General Configuration Page
1. Click C
2. Access the appropriate IPsec General Configuration page.
a. To display the IPv4 IPsec General Configuration page, click on the
b. To display the IPv6 IPsec General Configuration page, first click on
c. If you are on the IPv4 General Configuration page and wish to move
Note
Application procedures are the same for both configuration page types.
The primary difference is the format of the IP addresses. IPv4 uses dotted
quad format and IPv6 uses canonical address format. There may be
differences in selected range values; consult the inline Help option for
specifics.
The following sections describe how to create an IPsec policy:
596
on the home page.
ONFIG
IPsec link
the IPv6 Configuration link; this takes you to the main IPv6 page.
Next, click on the IPsec link; this takes you to the IPv6 IPsec General
Configuration Page.
to the IPv6 General configuration page, scroll down to the bottom of
the page and click the IPv6 IPsec General Configuration link.
Voyager Reference Guide