Changing The Local Preference Value Example - Nokia Voyager Reference Manual

Verification
To verify that you have configured BGP MED values correctly, run the
following commands in ICLID. For more information on these commands, go
to "Displaying Routing Protocol Information."
show route
show bgp neighbor <peerid> advertised
show route bgp metrics

Changing the Local Preference Value Example

This example shows how to set up two IBGP peers, and how to configure
routes learned using Nokia Platform A to have a higher local preference value
over Nokia Platform B (which has default local preference value of 100).
1. Configure the interface as in
2. Click the BGP link in the Routing Configuration section.
3. Enter
Voyager Reference Guide
AS100
Nokia
Platform A
20.10.5.1/24
20.10.10.1/24
IBGP
20.10.10.1/24
20.10.5.1/24
Nokia
Platform B
in the AS
NUMBER
100
20.10.5.1/24
EBGP
20.10.15.2/24
EBGP
"Configuring an Ethernet Interface."
edit box; then click A
AS676
Nokia
Platform C
AS342
Nokia
Platform D
00332
.
PPLY
305