Table of Contents
Advertisement
6
Configuring Routing
Enabling BGP function
!
!
Enabling weighted route dampening
1. Click C
2. Click the BGP link in the Routing Configuration section.
3. Click the Advanced BGP Options link.
4. Enable weighted route dampening by clicking the
E
The following fields are displayed:
Field
Suppress above
Reuse below
Max flaps
Reachable decay
Unreachable decay 900
Keep history
5. Enter any changes in the edit boxes that correspond to the appropriate
fields, then click A
Verification
To verify that you have configured route dampening correctly, run the
following command in ICLID. For more information on this command, go to
Displaying Routing Protocol Information.
show route bgp suppressed
324
on the home page.
ONFIG
NABLE WEIGHTED ROUTE DAMPENING
Default Value
3
2
16
300
1800
PPLY
field; then click A
Units of measurement
Number of route flaps or approximate value
of the instability metric
Same as above
Same as above
Seconds
Seconds
Seconds
.
radio button in the
ON
.
PPLY
Voyager Reference Guide
Advertisement
Table of Contents
