Table of Contents
Advertisement
Platform A
1. Configure the interface as in
2. Click the Interfaces link on the Configuration page.
3. Click the logical address loopback link.
4. Enter
Platform B
1. Configure the interface as in
2. Click the Interfaces link on the Configuration page.
3. Click the logical address loopback link.
4. Enter the
Platform A
1. Click the Static Routes link in the Routing Configuration section.
2. Enter
3. Enter
4. Enter
5. Enter
Platform B
1. Click C
2. Click the Static Routes link in the Routing Configuration section.
3. Enter
Voyager Reference Guide
in the N
1.2.3.4
in the N
5.6.7.8
A
.
PPLY
in the N
5.6.7.8
loopback address of Platform B.
in the M
ASK LENGTH
32
in the A
129.10.2.2
A
.
PPLY
in the A
129.10.1.2
A
.
PPLY
on the home page.
ONFIG
in the N
1.2.3.4
loopback address of Platform A.
"Configuring an Ethernet Interface"
IP
edit box and then click A
EW
ADDRESS
"Configuring an Ethernet Interface"
IP
EW
ADDRESS
edit box in order to reach the
EW STATIC ROUTE
edit box; then click A
DDITIONAL GATEWAY
DDITIONAL GATEWAY
edit box in order to reach the
EW STATIC ROUTE
edit box and then click
.
PPLY
edit box; then click
edit box and then click
.
.
PPLY
.
317
Advertisement
Table of Contents
