Nokia Voyager Reference Manual page 414

Hide thumbs Also See for Voyager:

Table of Contents

Configuring Traffic Management

The queue class disappears from the E

Setting or Modifying Queue Class Configuration

2. You can reach the Queue Class Configuration page in two ways. Either

click the Queue Class Configuration link under the T

Class Configuration link under the T

section.Click the Queue Class Configuration link under the T

3. Enter a name for each queue you want to configure in the L

edit box. This name appears on the queue monitoring page.

4. To modify an existing queue class, in the E

field, click on the name of the queue class you want to edit.

Choose a name (with no spaces) that will allow you to identify the queue's

Each queue class can have up to eight queues. Three queues are

reserved for internetwork control, expedited forwarding, and best effort

5. Enter an integer for the logical identifier used to address each queue you

configure within a queue class in the Q

6. For each queue, enter a value for the maximum number of packets that

can be queued before packets are dropped in the M

, and then click S

on the home page.

section, or click the IPv6 link and then click the Queue

to make your change permanent.

Voyager Reference Guide